3112
Comment:
|
4871
|
Deletions are marked like this. | Additions are marked like this. |
Line 3: | Line 3: |
##content goes here PiRotator |
|
Line 6: | Line 4: |
RaspberryPi controlled antenna rotator | = PiRotator = == RaspberryPi controlled antenna rotator == |
Line 9: | Line 9: |
Summary: Current commercial az/el antenna rotators are really expensive(easily over 1500€ with controllers), and moreover technically most are from 90s (analog potentiometer sensors/control, no network, rs/lpt controllable, no web, no rest api, etc). |
=== Summary: === Current commercial az/el antenna rotators are really expensive(easily over 1500€ with controllers), and moreover technically most are from 90s (analog potentiometer sensors/control, no network, rs/lpt controllable, no web, no rest api, etc). |
Line 12: | Line 14: |
I tried to take little bit different approach.. | I tried to take little bit different approach.. |
Line 14: | Line 16: |
Goals: 1. Cheap common hardware (wormgears, nema steppers, rasberrypi, etc) 2. Intelligence on mast (controlbox includes rasberrypi, this enables many things, like SDR on mast) 3. All digital (digital rotary sensors, steppers, tcp/ip, etc) 4. network (only IO is network, controlling thru different apis(REST, legacy RS emulation api)) 5. backward compatibility to legacy software, via software RS (ham radio deluxe, pstrotator, etc) 6. project is only for fun, and learning new stuff! |
=== Goals: === * Cheap common hardware (wormgears, nema steppers, rasberrypi, etc) * Intelligence on mast (controlbox includes rasberrypi, this enables many things, like SDR on mast) * All digital (digital rotary sensors, steppers, tcp/ip, etc) * network (only IO is network, controlling thru different apis(REST, legacy RS emulation api)) * backward compatibility to legacy software, via software RS (ham radio deluxe, pstrotator, etc) * project is only for fun, and learning new stuff! === Project status: === * hardware & software are in quite good shape * Rotator is in test use with 2 x 9el 2M yagis * Rotator has survied it first storm, with no damage! * Winter has come and rotator still functional even there has been few -20c temperatures * Worked over 70 EME contacts on first few weeks after getting amp for 2M.. whole setup seems to work good. * 2 days -30c and still working.. bit surprising. === Hardware: === |
Line 24: | Line 36: |
Hardware: | *Steppers: *Common 4-lead NEMA 23 *one full step 1.8 degrees *cheap (from 10$/each) *easy to control *Worm gears: *90 degree Gearbox WormGear Speed Reducer 1:60 ratio *most important is WormGear, because of that we do not need any brake system! *relatively sheap (about 50$ / each) *with 1:60 reduction we do not need that much power and precision is 1.8 (from step) / 60 -> 0.03angle /step *Absolute rotary encoders: *Cheapest used 10bit absolute rotary sensors what i could find (KOYO TRD-3A1024) *precision is more than enough (10bit -> 1024 -> 360/1024= 0.35 degrees) *price about 15€/each *10bit means in this case that there are 10pin for data + 2 power pins *IMU sensors for calibration : *BerryIMU + MPU9250 IMU chips *External weather shielded box which is connected directly to antenna support boom, gives you quite good compass / tilt bearings when calibrated correctly. *quite cheap(25€/each) and easy to use (i2c bus, RTIMULib2) *Slip rings: *https://en.wikipedia.org/wiki/Slip_ring *Capsule slip ring OD22MM 18Wires *stepper control cables and rotary sensors data cables to upper module go thru axle, with slip ring we dont have to worry about these cables and rotation. *about 15€ *Stepper control: *https://www.piborg.org/picoborgrev *PicoBorg Reverse *easy, cheap, efficient, |
Line 27: | Line 71: |
*Controller: *Raspberrypi 2 or B+ *full OS *enough gpio ports for encoders and stepper control *network port *could run as "SDR streamer" with rtl_tcp or similar *full python |
|
Line 28: | Line 79: |
Steppers: Common 4-lead NEMA 23 - one full step 1.8 degrees - cheap (from 10$/each) - easy to control Worm gears: 90 degree Gearbox WormGear Speed Reducer 1:60 ratio -most important is WormGear, because of that we do not need any brake system! -relatively sheap (about 50$ / each) -with 1:60 reduction we do not need that much power and precision is 1.8 (from step) / 60 -> 0.03angle /step Absolute rotary encoders: Cheapest used 10bit absolute rotary sensors what i could find (KOYO TRD-3A1024) -precision is more than enough (10bit -> 1024 -> 360/1024= 0.35 degrees) -price about 15€/each -10bit means on this case that there are 10pin for data + 2 power pins Slip rings: https://en.wikipedia.org/wiki/Slip_ring Capsule slip ring OD22MM 18Wires - stepper control cables and rotary sensors data cables to upper module go thru axle, with slip ring we dont have to worry about these cables and rotation. - about 15€ Stepper control: https://www.piborg.org/picoborgrev PicoBorg Reverse -easy, cheap, efficient, Controller: Raspberrypi 2 or B+ - full OS - enough gpio ports for encoders and stepper control - network port - could run as "SDR streamer" with rtl_tcp or similar - full python Connectors/box/cables/gears/belts/bolts/etc: |
*Connectors/box/cables/gears/belts/bolts/etc: |
Line 69: | Line 82: |
Software: | === Software: === |
Line 74: | Line 87: |
REST api for controlling (done) - you could control your rotator via simple http posts - enables many kind of solutions |
*REST api for controlling (done) *you could control your rotator via simple http posts *enables many kind of solutions |
Line 78: | Line 91: |
Legacy rotator emulation for legacy software via virtual RS (done) - emulates yeasu GS-232B protocol (only control and feedback commands implemented) - client OS sees SerialPort via virtual serial port software (eg. hw-groups HW virtual serial port -HW VSP3) - Tested with HRD rotator and PSTrotator |
*Legacy rotator emulation for legacy software via virtual RS (done) *emulates yeasu GS-232B protocol (only control and feedback commands implemented) *client OS sees SerialPort via virtual serial port software (eg. hw-groups HW virtual serial port -HW VSP3) *Tested with HRD rotator and PSTrotator |
Line 83: | Line 96: |
Simpple CLI UI (70%) - mainly for debugging purposes |
*Simpple CLI UI (70%) *mainly for debugging purposes |
Line 86: | Line 99: |
Multithreaded structure, and locks/aborts (90%) - could use all of those apis/interfaces at same time |
*Multithreaded structure, and locks/aborts (90%) *could use all of those apis/interfaces at same time |
Line 89: | Line 102: |
Neat WEB/JavaScript UI top of REST api (15%) - Graphical javascipt / angular UI |
*Neat WEB/JavaScript UI top of REST api (15%) *Graphical javascipt / angular UI === Videos === https://www.youtube.com/embed/0F_P8_iJNqI === Pictures === |
Line 92: | Line 108: |
[[attachment:imu.jpg|{{attachment:imu.jpg||width=200}}]] [[attachment:pirotator.jpg|{{attachment:pirotator.jpg||width=200}}]] [[attachment:outdoor_tests.jpg|{{attachment:outdoor_tests.jpg||width=200}}]] [[attachment:controlbox3.jpg|{{attachment:controlbox3.jpg||width=200}}]] [[attachment:pirotator1.jpg|{{attachment:pirotator1.jpg||width=200}}]] [[attachment:pirotator2.jpg|{{attachment:pirotator2.jpg||width=200}}]] [[attachment:slip_ring_encoder_gear.jpg|{{attachment:slip_ring_encoder_gear.jpg||width=200}}]] [[attachment:controlbox.jpg|{{attachment:controlbox.jpg||width=200}}]] [[attachment:controlbox2.jpg|{{attachment:controlbox2.jpg||width=200}}]] description:: Current commercial az/el antenna rotators are really expensive(easily over 1500€ with controllers), and moreover technically most are from 90s (analog potentiometer sensors/control, no network, rs/lpt controllable, no web, no rest api, etc).I tried to take little bit different approach.. started:: 2015-10-02 |
- hacker
PiRotator
RaspberryPi controlled antenna rotator
Summary:
Current commercial az/el antenna rotators are really expensive(easily over 1500€ with controllers), and moreover technically most are from 90s (analog potentiometer sensors/control, no network, rs/lpt controllable, no web, no rest api, etc).
I tried to take little bit different approach..
Goals:
- Cheap common hardware (wormgears, nema steppers, rasberrypi, etc)
- Intelligence on mast (controlbox includes rasberrypi, this enables many things, like SDR on mast)
- All digital (digital rotary sensors, steppers, tcp/ip, etc)
- network (only IO is network, controlling thru different apis(REST, legacy RS emulation api))
- backward compatibility to legacy software, via software RS (ham radio deluxe, pstrotator, etc)
- project is only for fun, and learning new stuff!
Project status:
hardware & software are in quite good shape
- Rotator is in test use with 2 x 9el 2M yagis
- Rotator has survied it first storm, with no damage!
- Winter has come and rotator still functional even there has been few -20c temperatures
- Worked over 70 EME contacts on first few weeks after getting amp for 2M.. whole setup seems to work good.
- 2 days -30c and still working.. bit surprising.
Hardware:
- Steppers:
- Common 4-lead NEMA 23
- one full step 1.8 degrees
- cheap (from 10$/each)
- easy to control
- Worm gears:
- Absolute rotary encoders:
- Cheapest used 10bit absolute rotary sensors what i could find (KOYO TRD-3A1024)
precision is more than enough (10bit -> 1024 -> 360/1024= 0.35 degrees)
- price about 15€/each
- 10bit means in this case that there are 10pin for data + 2 power pins
- IMU sensors for calibration :
- BerryIMU + MPU9250 IMU chips
- External weather shielded box which is connected directly to antenna support boom, gives you quite good compass / tilt bearings when calibrated correctly.
- quite cheap(25€/each) and easy to use (i2c bus, RTIMULib2)
- Slip rings:
- Capsule slip ring OD22MM 18Wires
- stepper control cables and rotary sensors data cables to upper module go thru axle, with slip ring we dont have to worry about these cables and rotation.
- about 15€
- Stepper control:
?PicoBorg Reverse
- easy, cheap, efficient,
- Controller:
- Raspberrypi 2 or B+
- full OS
- enough gpio ports for encoders and stepper control
- network port
- could run as "SDR streamer" with rtl_tcp or similar
- full python
- Connectors/box/cables/gears/belts/bolts/etc:
Software:
Plan / specs for pirotator server:
- REST api for controlling (done)
- you could control your rotator via simple http posts
- enables many kind of solutions
- Legacy rotator emulation for legacy software via virtual RS (done)
- emulates yeasu GS-232B protocol (only control and feedback commands implemented)
client OS sees ?SerialPort via virtual serial port software (eg. hw-groups HW virtual serial port -HW VSP3)
- Tested with HRD rotator and PSTrotator
- Simpple CLI UI (70%)
- mainly for debugging purposes
- Multithreaded structure, and locks/aborts (90%)
- could use all of those apis/interfaces at same time
- Neat WEB/JavaScript UI top of REST api (15%)
- Graphical javascipt / angular UI
Videos
https://www.youtube.com/embed/0F_P8_iJNqI
Pictures
- description
- Current commercial az/el antenna rotators are really expensive(easily over 1500€ with controllers), and moreover technically most are from 90s (analog potentiometer sensors/control, no network, rs/lpt controllable, no web, no rest api, etc).I tried to take little bit different approach..
- started
- 2015-10-02